Planning a home improvement project? Get a personalized estimate or check a quote you already have.
How to get a contractor license in every state
Contractor licensing in the US is a mess. California makes you prove four years of experience, pass two exams, and post a $25,000 bond. Texas doesn't require a general contractor license at all. Half the states fall somewhere in between, and the rules change depending on whether you're doing residential or commercial work. This guide covers what you actually need in all 50 states, what it costs, and how to avoid the mistakes that slow people down.
The short version: does your state even require one?
About 26 states require a statewide general contractor license. The rest handle it at the city or county level, or don't require one at all for general contracting work. But even in states without a statewide license, you almost always need trade-specific licenses for electrical, plumbing, and HVAC work. Those are regulated everywhere.
Here's the breakdown:
States with statewide GC license requirements
| State | License fee | Exam required | Experience |
|---|---|---|---|
| Alabama | $150 – $300 | Yes | Varies by classification |
| Arizona | $100 – $400 | Yes (trade + business) | 4 years |
| Arkansas | $50 – $150 | Yes | Varies |
| California | $200 + $25K bond | Yes (trade + law) | 4 years journeyman |
| Florida | $249 – $399 | Yes | 4 years or degree |
| Georgia | $80 – $180 | Yes (residential $2,500+ jobs) | Varies |
| Hawaii | $510 – $848 | Yes | 4 years |
| Louisiana | $100 – $300 | Yes (projects $75K+) | Varies |
| Michigan | $50 – $200 | Yes (residential builders) | Varies |
| Mississippi | $50 – $250 | Yes | Varies |
| Nevada | $200 – $500 | Yes (trade + business + law) | 4 years |
| North Carolina | $75 – $300 | Yes ($30K+ projects) | 4 years |
| Oregon | $175 – $325 | No (registration-based) | None (bond required) |
| South Carolina | $100 – $200 | Yes ($5K+ projects) | Varies |
| Tennessee | $100 – $300 | Yes ($25K+ projects) | Varies |
| Utah | $100 – $250 | Yes (trade + business) | 2 years |
| Virginia | $100 – $250 | Yes ($10K+ projects) | Varies by class |
| West Virginia | $30 – $150 | Yes | Varies |
This covers the most commonly searched states. Additional states with statewide requirements include Maryland, Massachusetts, Minnesota, Montana, New Mexico, North Dakota, Wisconsin, and Washington D.C. Fees and requirements change; always verify with your state licensing board.
States with no statewide GC license
Texas, Pennsylvania, New York, Colorado, Kansas, Missouri, Vermont, New Hampshire, Maine, and several others have no statewide general contractor license. That doesn't mean it's a free-for-all. Cities like New York City, Houston, Chicago, and Denver have their own registration, permit, and insurance requirements. And trade licenses (electrical, plumbing, HVAC) are almost always required at the state level regardless.
If your state isn't on the list above, call your county or city clerk's office and ask what's required for the type of work you do. "No state license" is not the same as "no requirements."
What the process actually looks like
The specifics vary by state, but the general process is the same almost everywhere:
1. Meet the experience requirement
Most states want 2-4 years of documented construction experience before you can apply. California requires four years at the journeyman level. Florida accepts four years of field experience or a four-year construction management degree. Some states, like Utah, only require two years.
"Documented" matters here. You'll need W-2s, 1099s, letters from employers, or project records showing you worked in construction during those years. A verbal "I've been doing this for a decade" doesn't count. If you've been working under someone else's license, get a letter from them confirming your role and dates. Do this before you need it.
2. Pass the exam
Most states require a two-part exam: a trade knowledge test (construction methods, building codes, safety) and a business and law test (contracts, lien laws, insurance requirements). Some states accept the NASCLA exam, which transfers across multiple states. Others have their own proprietary exams.
Exam fees run $50-$400 depending on the state. Study materials from your state licensing board are usually free. Third-party prep courses cost $200-$600 and are worth it if you haven't taken a test in a while. The pass rate on first attempts is around 50-60% in most states, so don't walk in cold.
3. Get bonded and insured
Almost every state requires a surety bond. The bond amount varies: California requires $25,000, Nevada requires $1,000 to $500,000 depending on your license classification, and most states fall in the $5,000 to $25,000 range. You don't pay the full bond amount. You pay a premium, which is typically 1-5% of the bond amount per year. A $15,000 bond might cost you $150-$750 annually.
You'll also need general liability insurance and, if you have employees, workers' compensation. General liability runs $2,000-$8,000/year for a small contractor. Workers' comp depends on your trade and payroll. Roofing and electrical pay the highest rates because the risk is highest.
4. Submit the application
Once you have your experience documentation, exam results, bond, and insurance, you submit the application to your state licensing board. Application fees range from $25 to $848 depending on the state. Processing times range from two weeks to three months. Some states have a backlog.
Common reasons applications get rejected: incomplete experience documentation, expired insurance certificates, criminal background issues (most states do a check), and missing exam scores. Fill everything out completely the first time. Resubmissions push you to the back of the line.
What it really costs
The license fee itself is usually the cheapest part. Here's a realistic total cost for a new general contractor license:
| Expense | Typical range |
|---|---|
| Application/license fee | $50 – $500 |
| Exam fee | $50 – $400 |
| Exam prep course | $200 – $600 |
| Surety bond (annual premium) | $100 – $750 |
| General liability insurance (annual) | $2,000 – $8,000 |
| Total first-year cost | $2,400 – $10,000+ |
California is the outlier because of the $25,000 bond requirement, which can push first-year costs to $15,000+ depending on your credit. Most other states are in the $2,500-$5,000 range to get fully licensed and insured.
The NASCLA exam and reciprocity
If you work across state lines, look into the NASCLA (National Association of State Contractors Licensing Agencies) exam. About 18 states accept the NASCLA commercial contractor exam, which means you take one test and can apply for licensure in any of those states without retaking the exam.
Participating states include Alabama, Arkansas, Georgia, Louisiana, Mississippi, Nevada, North Carolina, Oregon, South Carolina, Tennessee, Utah, Virginia, and West Virginia, among others. You still need to meet each state's experience, bond, and insurance requirements, but not having to resit the exam saves time and money.
For residential work, reciprocity is less common. Most states have their own residential contractor exam that covers state-specific building codes and lien laws. You'll probably need to test in each state you work in.
Mistakes that slow people down
We talk to contractors every week who are somewhere in the licensing process. The same problems come up over and over:
Not documenting experience early enough. If you've been working for someone else for three years, get a letter from them now confirming your title, dates, and the type of work you did. Former employers move, retire, or close their businesses. Getting that letter after the fact is harder.
Studying for the wrong exam. Some states have different license classes (residential vs. commercial, limited vs. unlimited). The exam is different for each class. Make sure you're studying for the one you're actually taking.
Letting insurance lapse during the application. Your insurance certificate needs to be active when the board processes your application. If you bought a policy three months ago and the application takes four months, your certificate might expire before they get to it. Check the timeline.
Not checking local requirements on top of state. Having a state license doesn't always mean you can pull permits in every city. Some municipalities require additional registration, business licenses, or local contractor permits. Check with the building department in every jurisdiction where you plan to work.
What happens if you work without a license
In states that require one, the penalties are real. California fines unlicensed contractors up to $5,000 for a first offense and up to $15,000 for repeat violations. In Florida, contracting without a license is a first-degree misdemeanor with fines up to $5,000 and potential jail time. Nevada can charge unlicensed contracting as a gross misdemeanor.
Beyond fines, unlicensed contractors can't enforce contracts in court in most states. That means if a homeowner stiffs you on a $30,000 job, you may have no legal recourse. You also can't file a mechanic's lien. And homeowners can sometimes recover all money paid to an unlicensed contractor, even if the work was done properly.
The license protects you as much as it protects the homeowner. It gives you the legal standing to get paid and the credibility to win jobs against competitors who can't prove they're legitimate.
Common questions
How much does a contractor license cost?
The license itself runs $50-$500 in most states. But the real cost includes exam fees ($50-$400), prep materials ($200-$600), a surety bond ($100-$750/year), and insurance ($2,000-$8,000/year). Budget $2,500-$5,000 for first-year total costs in most states. California runs higher because of the $25,000 bond.
Do I need a license for handyman work?
Most states exempt small jobs from licensing requirements. California exempts projects under $500. Many states set the threshold at $1,000-$5,000. But even for small jobs, you can't do work that requires a specialized trade license (electrical, plumbing, HVAC, gas) without the appropriate credential. A handyman exemption covers general repairs and maintenance, not licensed trade work.
Can I use my license in another state?
Generally, no. Each state issues its own license. The exception is the NASCLA commercial contractor exam, which about 18 states accept. If you pass the NASCLA exam, you can apply for a license in any participating state without retaking the exam. You still need to meet that state's experience, bond, and insurance requirements.
How long does it take?
1-6 months from application to license, assuming you already meet the experience requirement. The experience itself takes 2-4 years depending on the state. If you're starting from scratch, plan on 3-5 years total between gaining experience and getting licensed.
Get tips like this every week
Weekly pricing trends, business tips, and tools — curated for contractors who want to work smarter.
Free. No spam. Unsubscribe anytime.
Getting licensed takes time and money, but it's the difference between running a legitimate business and hoping nobody asks for your credentials. In states that require it, a license lets you pull permits, enforce contracts, file liens, and compete for work that unlicensed operators can't touch. In states that don't, getting licensed voluntarily or through a trade association still gives you a competitive edge that homeowners notice.
Start with your state's contractor licensing board website. Get the application, read the requirements, and start documenting your experience now. The paperwork is the boring part. Getting it done early is what separates the contractors who are licensed in six months from the ones who are still talking about it a year later.
Already licensed? Start winning more jobs.
Quotsey helps licensed contractors generate accurate, branded estimates in minutes using real local pricing data.
Related: How contractors price jobs · Why contractors lose jobs after the estimate · How Quotsey helps contractors
A note on accuracy: Licensing requirements, fees, and thresholds change frequently. The information in this guide is based on publicly available data as of November 2026 and may not reflect the most recent updates in your state. Always verify requirements directly with your state contractor licensing board or local building department before making decisions based on this article. Quotsey is not a legal or licensing advisory service.